| .LOW
COST, HIGH RELIABILITY |
.COMPACT
SIZE, LIGHT WEIGHT |
 |
| .105ºC OUTPUT CAPACITOR |
.100%
FULL LOAD BURN-IN TEST |
| .INTERNATIONAL
AC INPUT RANGE |
| .HIGH
EFFICIENCY, LOW WORKING TEMPERATURE |
| .SOFT-START
CIRCUIT, LIMITING AC SURGE CURRENT |
| .SHORT
CIRCUIT, OVERLOAD, OVER VOLTAGE PROTECTED |
|
|
|
SM-T115 |
| CH1 |
CH2 |
CH3 |
| DC OUTPUT VOLTAGE |
5V |
3.3V |
12V |
| OUTPUT V. TOLERANCE |
±2% |
±2% |
±2% |
| OUTPUT RATED CURRENT |
10A |
12A |
2A |
| OUTPUT CURRENT RANGE |
0-10A |
0-12A |
0-2A |
| RIPPLE & NOISE |
80mVp-p |
80mVp-p |
80mVp-p |
| LINE REGULATION |
±0.5% |
±0.5% |
±0.5% |
| LOAD REGULATION |
±2% |
±2% |
±1% |
| DC OUTPUT MAX. POWER |
113.6W |
| EFFICIENCY |
73% |
| DC VOLTAGE ADJ. |
VR2:±5% |
VR1:±5% |
VR3:±5% |
| INPUT VOLTAGE RANGE |
88~132VAC / 176~264VAC SELECTED
BY SWITCH 47~63Hz; 120~370VDC |
| AC CURRENT |
2.8A/115V
1.7A/230V |
| INRUSH CURRENT |
COLD
START 25A/115V 50A/230V |
| LEAKAGE CURRENT |
<3.5mA/240VAC |
| OVERLOAD PROTECTION |
105%~150%
TYPE:PULSING HICCUP SHUTDOWN
RESET:AUTO RECOVERY |
| OVER VOLTAGE PROTECTION |
115%~135% |
115%~150% |
115%~135% |
| OVER TEMP. PROTECTION |
---------- |
| TEMP. COEFFICIENT |
±0.05%
/ ºC (0~50ºC) ON +5V OUTPUT |
| SETUP, RISE, HOLD UP TIME |
800ms,
10ms, 40ms |
| VIBRATION |
10~500Hz, 2G
10min./1cycle, PERIOD FOR 60min. EACH AXES |
| WITHSTAND VOLTAGE |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| ISOLATION RESISTANCE |
I/P-O/P,O/P-FG,
I/P-FG:500VDC / 100M Ohms |
| WORKING TEMP., HUMIDITY |
-10ºC~+60ºC(REFER TO OUTPUT DERATING CURVE) |
| STORAGE TEMP., HUMIDITY |
-20ºC~+85ºC, 5%~95% RH |
| DIMENSION |
199*110*50mm |
| WEIGHT |
0.78Kgs |
| NOTE
: |
1.ALL PARAMETERS
ARE SPECIFIED AT 230VAC 50Hz INPUT, RATED LOAD, 25ºC 70% RH. AMBIENT. |
|
2.TOLERANCE：INCLUDE SET UP TOLERANCE,
LINE REGULATION, LOAD REGULATION. |
|
3.RIPPLE & NOISE
ARE MEASURED AT 20MHz BY USING A 12" TWISTED PAIR TERMINATED
WITH A 0.1uF & 47uF CAPACITOR. |
|
4.LINE REGULATION
IS MEASURED FROM LOW LINE TO HIGH LINE AT RATED LOAD. |
|
5.LOAD REGULATION IS MEASURED
FROM 20% TO 100% RATED LOAD, AND OTHER OUTPUT AT 60% RATED LOAD. |
|
6.C3,4,7 MUST BE REMOVED. |
|