| .LOW COST, HIGH RELIABILITY |
.COMPACT SIZE, LIGHT
WEIGHT |
 |
| .105ºC OUTPUT CAPACITOR |
.100% FULL LOAD BURN-IN
TEST |
| .INTERNATIONAL AC
INPUT RANGE |
.BUILT IN EMI FILTER,
LOW RIPPLE NOISE |
| .HIGH EFFICIENCY,
LOW WORKING TEMPERATURE |
| .SOFT-START CIRCUIT,
LIMITING AC SURGE CURRENT |
| .SHORT CIRCUIT, OVERLOAD
PROTECTED |
|
|
|
SM-S250-5 |
SM-S250-12 |
SM-S250-15 |
SM-S250-24 |
SM-S250-27 |
SM-S250-48 |
| DC OUTPUT VOLTAGE |
5V |
12V |
15V |
24V |
27V |
48V |
| OUTPUT V. TOLERANCE |
±2% |
±1% |
±1% |
±1% |
±1% |
±1% |
| OUTPUT RATED CURRENT |
40A |
18A |
15A |
10A |
9A |
5.2A |
| OUTPUT CURRENT RANGE |
0-40A |
0-18A |
0-15A |
0-10A |
0-9A |
0-5.2A |
| RIPPLE & NOISE |
80mVp-p |
120mVp-p |
120mVp-p |
120mVp-p |
150mVp-p |
200mVp-p |
| LINE REGULATION |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| LOAD REGULATION |
±1% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| MAX. DC OUTPUT POWER |
200W |
216W |
225W |
240W |
243W |
249.6W |
| EFFICIENCY |
74% |
79% |
80% |
81.5% |
82% |
82% |
| DC VOLTAGE ADJ. |
4.75-5.5V |
10.8-13.2V |
13.5-16.5V |
21.6-26.4V |
24.3-29.7V |
43.2-52.8V |
| INPUT VOLTAGE RANGE |
90~132VAC / 176~264VAC SELECTED BY SWITCH 47~63Hz; 248~370VDC |
| AC CURRENT |
6A/115V 3.5A/230V |
| INRUSH CURRENT |
COLD START 50A/230VAC |
| LEAKAGE CURRENT |
<2mA/240VAC |
| OVERLOAD PROTECTION |
105%~135%
TYPE:PULSING HICCUP SHUTDOWN RESET:AUTO RECOVERY |
| OVER VOLTAGE PROTECTION |
115~135% TYPE:PLUSE BY PULSE |
| TEMP. COEFFICIENT |
±0.03% / ºC (0~50ºC) |
| SETUP, RISE, HOLD UP TIME |
800ms, 50ms, 16ms |
| VIBRATION |
10~500Hz, 2G 10min./1cycle, PERIOD FOR 60min. EACH AXES |
| WITHSTAND VOLTAGE |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms |
| WORKING TEMP., HUMIDITY |
-10ºC~+60ºC(REFER TO OUTPUT DERATING CURVE), 20%~90%
RH |
| STORAGE TEMP., HUMIDITY |
-20ºC~+85ºC, 10%~95% RH |
| DIMENSION |
150*140*86mm |
| WEIGHT |
1.3Kgs |
| NOTE : |
1.ALL PARAMETERS ARE SPECIFIED
AT 230VAC INPUT, RATED LOAD, 25ºC 70% RH. AMBIENT. |
|
2.TOLERANCE : INCLUDE SET UP TOLERANCE,
LINE REGULATION, LOAD REGULATION. |
|
3.RIPPLE & NOISE ARE MEASURED
AT 20MHz BY USING A 12" TWISTED PAIR TERMINATED WITH A 0.1uF
& 47uF CAPACITOR. |
|
4.LINE REGULATION IS MEASURED
FROM LOW LINE TO HIGH LINE AT RATED LOAD. |
|
5.LOAD REGULATION IS MEASURED
FROM 0% TO 100% RATED LOAD. |
|
