| .LOW
COST, HIGH RELIABILITY |
.COMPACT
SIZE, LIGHT WEIGHT |
 |
| .105ºC OUTPUT CAPACITOR |
.100%
FULL LOAD BURN-IN TEST |
| .INTERNATIONAL
AC INPUT RANGE |
.BUILT
IN EMI FILTER, LOW RIPPLE NOISE |
| .HIGH
EFFICIENCY, LOW WORKING TEMPERATURE |
| .SOFT-START
CIRCUIT, LIMITING AC SURGE CURRENT |
| .SHORT
CIRCUIT, OVERLOAD, OVER VOLTAGE PROTECTED |
|
|
|
SM-S40-5 |
SM-S40-12 |
SM-S40-15 |
SM-S40-24 |
| DC OUTPUT VOLTAGE |
5V |
12V |
15V |
24V |
| OUTPUT V. TOLERANCE |
±2% |
±1% |
±1% |
±1% |
| OUTPUT RATED CURRENT |
8A |
3.5A |
2.8A |
1.8A |
| OUTPUT CURRENT RANGE |
0-8A |
0-3.5A |
0-2.8A |
0-1.8A |
| RIPPLE & NOISE |
75mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
| LINE REGULATION |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| LOAD REGULATION |
±1% |
±0.5% |
±0.5% |
±0.5% |
| DC OUTPUT POWER |
40W |
42W |
42W |
43W |
| EFFICIENCY |
72%
/ 115VAC |
76%
/ 115VAC |
76%
/ 115VAC |
78%
/ 115VAC |
| DC VOLTAGE ADJ. |
+10,-5% |
±10% |
±10% |
±10% |
| INPUT VOLTAGE RANGE |
85~264VAC
47~63Hz; 120~370VDC |
| AC CURRENT |
1.2A/115V 0.6A/230V |
| INRUSH CURRENT |
COLD
START 30A/115V
60A/230V |
| LEAKAGE CURRENT |
<1mA/240VAC |
| OVERLOAD PROTECTION |
105%~150%
TYPE:PULSING HICCUP SHUTDOWN
RESET:AUTO RECOVERY |
| OVER VOLTAGE PROTECTION |
115%~135% |
| OVER TEMP. PROTECTION |
---------- |
| TEMP. COEFFICIENT |
±0.03%
/ ºC (0~50ºC) |
| SETUP, RISE, HOLD
UP TIME |
800ms,
50ms, 15ms / 115VAC 300ms,
50ms, 60ms / 230VAC |
| VIBRATION |
10~500Hz, 2G
10min./1cycle, PERIOD FOR 60min. EACH AXES |
| WITHSTAND VOLTAGE |
I/P-O/P:3KVAC I/P-FG:1.5KVAC
O/P-FG:0.5KVAC |
| ISOLATION RESISTANCE |
I/P-O/P,
I/P-FG, O/P-FG:500VDC / 100M Ohms |
| WORKING TEMP., HUMIDITY |
-10ºC~+60ºC(REFER TO OUTPUT DERATING CURVE), 20%~90% RH |
| STORAGE TEMP., HUMIDITY |
-20ºC~+85ºC, 10%~95% RH |
| DIMENSION |
129*98*38mm |
| WEIGHT |
0.45Kgs |
| NOTE
: |
1.ALL PARAMETERS
ARE SPECIFIED AT 230VAC INPUT, RATED LOAD, 25ºC 70% RH. AMBIENT. |
|
2.TOLERANCE¡GINCLUDE SET UP TOLERANCE,
LINE REGULATION, LOAD REGULATION. |
|
3.RIPPLE & NOISE
ARE MEASURED AT 20MHz BY USING A 12" TWISTED PAIR TERMINATED
WITH A 0.1uF & 47uF CAPACITOR. |
|
4.LINE REGULATION
IS MEASURED FROM LOW LINE TO HIGH LINE AT RATED LOAD. |
|
5.LOAD REGULATION
IS MEASURED FROM 0% TO 100% RATED LOAD. |
|
6.C2,3,6 MUST BE REMOVED. |
|
